NEC NEAX 2000 IPS - Mounting Csh Card

CHAPTER 2 INSTALLATION
– 44 –
NWA-008855-001 Rev.1.0
avch2001.fm
MOUNTING CSH CARD
(1) Before mounting the CSH (PN-SC03-B) card, set the MB switch to UP
position, and set the other switches to appropriate position.
See CHAPTER 4. Page 165
(2) Mount the CSH card in the following AP slots of PIM0 through PIM7.
PIM0-7 : AP00-AP11 slots
PIM0 (for Backup CPU): AP00-AP10 slots
(3) After mounting the card, set the MB switch to DOWN position to put the card in service.
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
MOUNTING CSH CARD