CHAPTER 3 SYSTEM DATA PROGRAMMING
– 148 –
NWA-008855-001 Rev.1.0
avch3001.fm
Number Sharing
DESCRIPTION DATA
Specify the combination of the main station
and the sub station, also the opposite combina-
tion, as follows.
1st data: Main station (D
term
My Line)
2nd data: Sub station (PS)
1st data: Sub station (PS)
2nd data: Main station (D
term
My Line)
NOTE: As the main station number, D
term
My Line number must be assigned.
As the sub station number, Virtual
Station number assigned by CM14
must be assigned.
•
(1)
(2)
Y=19 Assignment of main station and sub
station
X-XXXXXXXX: Main station No./Sub
station No.
X-XXXXXXXX: Sub station No./Main
station No.
Assign the Class of Service to required sta-
tions.
NOTE: For the Trunk Restriction Class
(CM12 Y=01) and the Tenant Num-
ber (CM12 Y=04), the same data
must be assigned to the sub station
and the main station.
•
(1)
(2)
Y=02
X-XXXXXXXX: Main station No./Sub
station No.
XX ZZ
XX: 00-15 : Service Restriction Class A
To the sub station (PS), specify the number that
is informed to the calling/called party, SMDR
and MCI as the main station number.
•
(1)
(2)
Y=127
00-15: Service Restriction Class A of main
station
1 : Own station number is informed
(1)
(2)
00-15: Service Restriction Class A of sub
station
0: Main station number is informed
START
CM12
CM15
A
WCS FEATURE PROGRAMMING
To Next Page
Loading...
