CHAPTER 3 SYSTEM DATA PROGRAMMING
– 150 –
NWA-008855-001 Rev.1.0
avch3001.fm
PS Location Indication
DESCRIPTION DATA
Assign Service Restriction Class A to each sta-
tion.
•
(1)
(2)
Y=02
X-XXXXXXXX: Station No.
For PS: Virtual Station No. assigned by
CM14
XX ZZ
XX: 00-15 : Service Restriction Class A
Allow PS Location Indication in Service Re-
striction Class A for PS.
•
(1)
(2)
Y=148
00-15: Service Restriction Class A
assigned by CM12 Y=02
1 : Allow
Allow PS Location Indication in Service Re-
striction Class A for D
term
.
•
(1)
(2)
Y=149
00-15: Service Restriction Class A
assigned by CM12 Y=02
0: Allow
Provide the ATTCON/DESKCON with PS
Location Indication.
(1)
(2)
521: PS Location Indication
0: To provide
1: Not provided
Enter the CS name to each CS number by
CM77 Y=8 or CM77 Y=9.
•
(1)
(2)
Y=8 By Character
000-255: CS No.
Character Code 20-7F: Maximum 32 digits
See Character Code Table.
Page 141
•
(1)
(2)
Y=9 By Character
000-255: CS No.
A-Z, 0-9: Character
Maximum 16 characters
NOTE 1: The maximum number of characters per CS is 16, including spaces.
NOTE 2: There are two ways to change a name that is currently programmed. (1) Overwriting with
new name, or (2) inserting a blank space as the first character will cancel the existing
name.
START
CM12
CM15
CM08
CM77
END
WCS FEATURE PROGRAMMING
To Next Page
Loading...
