CHAPTER 2 INSTALLATION
ā 68 ā
NWA-008855-001 Rev.1.0
avch2001.fm
SETUP OF IP-CS
To startup the IP-CS, following data assignment is required in addition to the system data assignment.
Assign the data for IP-CS Setup according to following procedure.
Assignment for the IP Address, Default Gateway Address, and DRS
IP Address, Default Gateway Address, and DRS can be assigned from a PC when LAN connection be-
tween the IP-CS and the PC is provided.
Following steps explain the assignment for IP Address, Default Gateway Address, and DRS.
STEP1:
Connect the IP-CS and the PC.
To enable the remote login, accommodate the IP-CS and the PC on the same LAN network or
connect the IP-CS and the PC directly using the 10BASE-T/100BASE-T cable (straight cable).
Connecting IP-CS and PC
10BASE-T / 100BASE-TX CABLE
(STRAIGHT CABLE)
IP-CS
PC
TO AC ADAPTER
SETUP OF IP-CS
To Next Page
Loading...
