CHAPTER 3 SYSTEM DATA PROGRAMMING
– 87 –
NWA-008855-001 Rev.1.0
avch3001.fm
PRECAUTIONS
System Data Backup
CAUTION
• If you operate the following without system data backup after system data setting or service
memory setting (registration of the features such as “Call Forwarding” and “Speed Calling
[Speed Dialing]” from a station), the data has been set is invalid.
You must execute the system data backup before the following operations.
-Turning Off the system
-System Initial (reset of MP card)
-Changing the MP card to Off-Line Mode
-Changing the MP card to On-Line Mode after system data setting under Off-Line Mode
• You can execute the system data backup by the following two ways.
-Executing the system data backup once a day at the time set by CM43 Y=5>00
(If no data is set, the default setting is 3:00 a.m.)
-Executing the system data backup from MAT/CAT by CMEC Y=6>0:0
• Do not reset the MP card, while “SYSD” lamp on the MP card is flashing.
PRECAUTIONS
To Next Page
Loading...
