Soft Phone Wireless Handset
Page 36 ND-91638-007(E)
Issue 6
Soft Phone Wireless Handset
General Description
This feature allows a Soft Phone (D
term
SP30) user to use a PS terminal as the handset of the Soft Phone. The
user can select a handset (Soft Phone Handset or PS) by pressing the Handset Switch key on the Soft Phone.
Configuration Application
Integrated Type
Operating Procedure
The operating procedure is described using the example below.
• A call is originated by dialing from a PS or D
term
SP30. A call can also be originated using the address book
button, call logs or member buttons of D
term
SP30.
• PS interactive operation can be set and cancelled, by pressing the function key on D
term
SP30.
• Hold, Call Transfer, and Call Forwarding - All Calls/Busy Line/Don’t Answer can be operated from either
a PS or D
term
SP30.
• When the PS is out of cell, a call is forwarded to the logout destination of the D
term
SP30.
• Even if a PS originates a call, the station number of D
term
SP30 is displayed on the called party terminal.
To originate a call
■ To dial after placing the PS off-hook
1. Place the PS off-hook (hear dial tone).
2. Dial a desired station number 2000 from the PS.
3. The station answers to start conversation (3000 is displayed on the LCD of the station as a calling number).
Note: Only the PS can cancel dialing and end conversation. (Operation from the Dterm SP30 is disabled.)
D
term
SP30:
Station No.3000
PS
IPS
CS
LAN
Station:
Station No. 2000
To Next Page
Loading...
