NEC NEAX 2000 IPS - Mounting Csi Card

CHAPTER 2 INSTALLATION
– 45 –
NWA-008855-001 Rev.1.0
avch2001.fm
MOUNTING CSI CARD
(1) Before mounting the CSI (PN-2CSIA-A) card, confirm the correct switch
settings. See CHAPTER 4. Page 167
For the CSI (PN-2CSIH/PN-4CSIA) card, no switch setting is required.
(2) Mount the CSI card in the LT00-LT07 slots of PIM0 through PIM7.
NOTE 1: Maximum of four PN-4CSIA cards can be mounted per PIM, maximum of 32 cards per system.
PN-4CSIA card is to be mounted only in the even number slot of LT00-LT07 (LT00, LT02, LT04,
LT06).
EXAMPLE: When mounting four PN-4CSIA cards in PIM0-7
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
00 01 02 03 04 05 06 07 08 09 10 11 12
PFT VM
PIM
0-7
4CSIA card CSH card 4CSIA card CSH card 4CSIA card 4CSIA card application processor card
application processor card application processor card application processor card application processor card application processor card
MP/FP
The rest of slots:
The other application
processor cards
can be mounted
The adjoining right side slots to the
PN-4CSIA card mounting slots:
Only application processor cards can be mounted
PN-4CSIA cards
mounting slots
MOUNTING CSI CARD