NEC NEAX 2000 IPS - Calling Name Display-PS

CHAPTER 3 SYSTEM DATA PROGRAMMING
– 136 –
NWA-008855-001 Rev.1.0
avch3001.fm
Calling Name Display-PS
To provide this feature, the BISON type PS is required.
For Calling Name Display-CCIS, refer to the CCIS System Manual.
DESCRIPTION DATA
Provide the system with the Name Display
Service.
(1)
(2)
255
1: To provide
Specify the station number and name display
when an incoming call begins ringing.
(1)
(2)
335
0 : Display only when incoming call ter-
minates to Prime Line
1 : Display when incoming call termi-
nates to Prime Line or My Line
Assign Service Restriction Class A to each sta-
tion.
•
(1)
(2)
Y=02
X-XXXXXXXX: PS Station No. down-
loaded (CM1C)
XX ZZ
XX: 00-15 : Service Restriction Class A
Provide Calling Name Display to the PS.
NOTE: The former type PS does not provide
the Calling Name Display feature;
therefore, CM15 Y=123 should be
set to “1” Not Available.
Set data to “0” Available if provid-
ing this service for the BISON type
PS.
•
(1)
(2)
Y=123
00-15: Service Restriction Class A
assigned by CM12 Y=02
0 : Available
1 : Not Available
START
CM08
INITIAL
CM12
CM15
A
WCS FEATURE PROGRAMMING