CHAPTER 3 SYSTEM DATA PROGRAMMING
– 118 –
NWA-008855-001 Rev.1.0
avch3001.fm
CS PROGRAM DOWNLOAD
[MATWorX Ver. 3 or later required]
When you upgrade the CS program, download the CS program from the Control CS to other CSs through
the MAT.
NOTE: This is available only for the BS31.
Operating Procedure
STEP1:
Prepare the Control CS, in which the latest program is pre-registered, and the Key FD.
STEP2:
Install and connect the Control CS to the system. Page 49, Page 60
STEP3:
Download the CS program from the Control CS to other CSs, using the MATWorX’s Add-In.
One Key FD for CS Program Download is required per system.
For the operation of MAT, refer to the online MATWorX User Guide.
Service Conditions
• You cannot download the Control CS program into two or more CSs at the same time.
• CS program download requires about five minutes for each CS.
• The Control CS and other CSs must be in normal operation, not in make busy state.
CS PROGRAM DOWNLOAD
To Next Page
Loading...
