NEC NEAX 2000 IPS - Group Call-2 Way Calling

CHAPTER 3 SYSTEM DATA PROGRAMMING
– 145 –
NWA-008855-001 Rev.1.0
avch3001.fm
Group Call-2 Way Calling
DESCRIPTION DATA
Assign the stations that belong to each paging
group, and their number within the group.
A maximum of 9 stations can be paged simul-
taneously except the conference leader.
NOTE 1: Single line telephones, D
term
s and
PSs can be assigned as the station
within the group.
A Virtual-line assigned by CM11
cannot be used.
NOTE 2: One station can belong to multiple
groups.
•
(1)
(2)
Y=00-07
Simultaneous Paging Group 0-7
00-15: Serial No. within the Group
X-XXXXXXXX: Station No.
For PS; Virtual Station No. assigned by
CM14
Assign Service Restriction Class A to each sta-
tion.
•
(1)
(2)
Y=02
X-XXXXXXXX: Station No.
For PS; Virtual Station No. assigned by
CM14
XX ZZ
XX: 00-15 : Service Restriction Class A
Allow Service Restriction Class A to page the
conference.
•
(1)
(2)
Y=119
00-15: Service Restriction Class A
assigned by CM12 Y=02
0: Allow
Assign the access code of paging groups for
Group Call-2 Way Calling.
NOTE: Even if an extension does not belong
to the conference group, the exten-
sion can page the conference group.
•
(1)
(2)
Y=0-3 Tenant Group No.
X-XXXX: Access Code
A220: Simultaneous Paging Group 0
for Group Call-2 Way Calling
A227: Simultaneous Paging Group 7
for Group Call-2 Way Calling
Assign the Group Call-2 Way Calling key of
each paging group to the D
term
, if required.
NOTE: Even if an extension does not belong
to the conference group, the exten-
sion can page the conference group.
•
(1)
(2)
Y=00
X-XXXXXXXX: My Line No. + +
Key No.
F0B20: Simultaneous Paging Group 0
for Group Call-2 Way Calling
F0B27: Simultaneous Paging Group 7
for Group Call-2 Way Calling
START
CM56
CM12
CM15
CM20
~ ~
CM90
,
~ ~
END
WCS FEATURE PROGRAMMING