Group Call - 2 Way Calling
ND-91638-007(E) Page 19
Issue 6
Group Call - 2 Way Calling
General Description
This feature permits a PS/D
term
/Single Line Telephone to page a maximum of fifteen parties simultaneously ex-
cept the group call leader. After one of paged parties answers, the paging becomes the 2 Way Calling between
the leader and the first answered party, and paging other parties stops automatically. The PSs are assigned
through system data as participants in the simultaneous paging groups.
Configuration Application
Integrated Type
Operating Procedure
To page stations of a group:
From PS/D
term
/Single Line Telephone;
1. Press the L1 key or go off hook, and receive a dial tone.
2. Dial the access code or press feature key (D
term
only) for a desired paging group, and receive a ringback
tone.
OR
From PS;
1. Dial the access code for a desired paging group.
2. Press the L1 key and receive a ringback tone.
If the paged stations are all busy or the leader is not assigned as the conference leader with service feature class,
a reorder tone is heard.
3. Paging stops after one of paged parties answered.
To answer the paging:
1. When the paging call terminates, the LCD shows the station number of the group call leader.
2. Answer the ringing of paging from the group call leader.
3. Paging stops after one of paged PSs answered.
Service Conditions
1. A maximum of fifteen stations is paged simultaneously except the group call leader.
Even if more than fifteen stations are assigned to one group except the leader, the first fifteen stations are
paged in order of registered number on the system data. Also one station can belong to multiple groups.
2. Single Line Telephones, D
term
s, PSs can be assigned as the stations within the group call groups (Virtual
line cannot be assigned). A station can belong to multiple groups.
3. Up to eight groups can be assigned as the call group by system data, including voice paging and Group Call-
Automatic Conference.
4. A Single Line Telephone, D
term
, and PS can be a group call leader and page a group, even if it does not
belong to the group.
To Next Page
Loading...
