CHAPTER 2 INSTALLATION
– 40 –
NWA-008855-001 Rev.1.0
avch2001.fm
WCS Required Equipment
*
: Should be provided by customer.
EQUIPMENT DESCRIPTION QUANTITY REMARKS
• WCS with IP-CS
PN-32IPLA/
PN-32IPLA-A
(IP-PAD)
32-channel IP-PAD Card 1-8 Used for connection
between IP-CS and
Legacy Terminals/
Public Network/Tie
Line Network
PN-16VCTA /
PN-16VCTA-A
(16VCT)
16-channel CODEC Card 1-16
IPTRK BUS CA Set of 3 BUS Cables between IP-
PAD and 16VCT Cards
1-8 sets
PN-8IPLA
(IP-PAD)
8-channel IP-PAD Card 1-8
PZ-24IPLA
(24DSP)
24-channel DSP Card
for 8-channel IP-PAD Card
1-8
10BASE-T Cable
(TIA/EIA category 3
or larger)*
100BASE-TX Cable
(TIA/EIA category
5)*
10BASE-T/100BASE-TX Cable
between Ether Card and HUB,
HUB and IP-CS
As required Cable length:
Maximum 100 m
Router* NOTE: Cisco Router is recom-
mended.
As required
HUB* NOTE: Switching HUB is required
for ETHER and IP-CS.
As required
AC-RD UNIT* AC Adapter for IP-CS Local
Power Supply
N
PN-CFTB 6/10 Party Conference Trunk N N: As required for
Group Call
PN-4DATC Digital Announcement Trunk N N: As required for
Announcement
Service
REQUIRED EQUIPMENT
To Next Page
Loading...
