EasyManua.ls Logo

NEC SL2100 - Page 270

NEC SL2100
978 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Program
No.
Program Name Input Data Default
12-04-01 Holiday Night Service Switching Night Mode Service Group No.;
01-04
Days and Months: 0101 ~ 1231
(e.g. 0101 = Jan. 1; 1231 = Dec.
31)
Time Pattern Number: 0 ~ 10
(0 = No Setting)
No Setting
15-07-01 Programmable Function Keys Line Key 1 ~ 24
0 ~ 99 (Normal Function Code
751 by default)
*
00 ~
*
99 (Appearance Func-
tion Code)
(Service Code 752 by default)
Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
20-07-26 Class of Service Options (Administrator Level) -
Dial-In Mode Switch
0 = Off (Station cannot control
DDI switching.)
1 = On (Station can control DDI
switching.)
COS1 ~ 14/COS15 = 1
22-02-01 Incoming Call T
runk Setup - Trunk Service Type 0 = Normal
1 = VRS (second dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = Tie Line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID (DDI) Mode Switching
0
22-11-02 DID Translation Table - Target Number Maximum 36 digits
(0 ~ 9,
*
, #, @)
Refer to the program-
ming manual for the
default values.
22-17-01 Dial-In Conversion Table Area Setup for Time
Pattern - Received Dial
Up to eight digits No Setting
22-17-02 Dial-In Conversion Table Area Setup for Time
Pattern - Start of Time
0000 ~ 2359 (Time) 0000
22-17-03 Dial-In Conversion T
able Area Setup for Time
Pattern - End of Time
0000 ~ 2359 (Time) 0000
22-17-04 Dial-In Conversion Table Area Setup for Time
Pattern - Dial-In Conversion Table Number
1 ~ 1000 (These are the table
entries in PRG 22-11.)
0
22-17-05 Dial-In Conversion Table Area Setup for Time
Pattern - Day of week
1: Sun
2: Mon
3: Tue
4: Wed
5: Thu
6: Fri
8: Sun
9: Holiday
0 = Off
1 = On
1
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
1 ~ 15 Extension 101 is Class
15 and other Extension
are Class 1
20-09-01 Class of Service Options (Incoming Call Service)
- Second Call for DID/DISA/DIL/E&M Override
0 = Off (2nd call will not be al-
lowed.)
1 = On (2nd call is allowed.)
COS 01 ~ 15 = 1
20-13-23 Class of Service Options (Supplementary Serv-
ice) - Display the Reason for Transfer
0 = Off
1 = On
COS 01 ~ 15 = 0
21-01-02 System Options for Outgoing Calls - Intercom In-
terdigit Time
0 ~ 64800 seconds 10
SL2100 ISSUE 1.0
1-256
Direct Inward Dialing (DID)
D

Table of Contents

Other manuals for NEC SL2100

Related product manuals