EasyManua.ls Logo

NEC SL2100 - Page 835

NEC SL2100
978 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Program
No.
Program Name Input Data Default
13-04-03 Speed Dialing Number and Name - Transfer
Mode
0 = Not Used (Calls will not be
routed based off a users caller
ID.)
1 = Internal Dial (Calls will be
routed to an internal number
specified in PRG 13-04-04.)
2 = Incoming Ring Group (Calls
will be routed to a ring group
specified in PRG 13-04-04.)
3 = Remote Monitor (Used for
the security feature and not Flex-
ible Caller ID routing.)
0
13-04-04 Speed Dialing Number and Name - Transfer Des-
tination Number
If Transfer mode is (Refer to
13-04-03) :
1 = Internal Dial Mode
1 ~ 9, 0,
*
, #, P, R, @
(Maximum 36 Characters)
2 = Incoming Ring Group
0 ~ 25 (IRG Number)
P = Pause
R = Recall
@ = Additional Digits when using
ISDN functionality
3 = Remote Monitor
Dial (Up to 8 digits)
No Setting
13-04-05 Speed Dialing Number and Name - Incoming
Ring Pattern
0 = Normal System Ring Pattern
1 ~ 4 = Tone Pattern 1 ~ 4
5 ~ 9 = Scale Pattern 1 ~ 5
10 ~ 13 = Tone Pattern 5 ~ 8
0
14-01-04 Basic Trunk Data Setup - Transmit Gain Level for
Conference and Transfer Calls
1 ~ 57
(-15.5 dB ~ +12.5 dB in 0.5 dB
intervals)
32 (0 dB)
14-01-05 Basic Trunk Data Setup - Receive Gain Level for
Conference and Transfer Calls
1 ~ 57
(-15.5 dB ~ +12.5 dB in 0.5 dB
intervals)
32 (0 dB)
14-01-13 Basic Trunk Data Setup - Trunk-to-Trunk Trans-
fer
0 = Disable (No)
1 = Enable (Yes)
1
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
1 ~ 15 Extension 101 is Class
15 and other Extension
are Class 1
20-07-05 Class of Service Options (Administrator Level) -
Set/Cancel Automatic Trunk-to-Trunk Transfer
0 = Off
1 = On
COS1 ~ 14/COS15 = 0
20-07-11 Class of Service Options (Administrator Level) -
Forced Trunk Disconnect (analog trunk only)
0 = Off
1 = On
COS1 ~ 14/COS15 = 1
24-02-07 System Options for Transfer - Trunk-to-Trunk
Transfer Release Warning Tone
0 ~ 64800 seconds 1800
24-02-10 System Options for Transfer - Disconnect Trunk-
to-Trunk
0 ~ 64800 seconds 0
24-04-01 Automatic Trunk-to-Trunk Transfer Target Setup
- Speed Dial Area Number
Trunk Port Number : 1 - 128
0 ~ 999
999
25-07-07 System Timers for VRS/DISA - Long Conversa-
tion Warning Tone Time
0 ~ 64800 seconds 1800
25-07-08 System Timers for VRS/DISA - Long Conversa-
tion Disconnect Time
0 ~ 64800 seconds 30
ISSUE 1.0 SL2100
Features and Specifications Manual 1-821
T

Table of Contents

Other manuals for NEC SL2100

Related product manuals