EasyManua.ls Logo

NEC SL2100 - Page 98

NEC SL2100
978 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Program
No.
Program Name Input Data Default
26-02-03 * Dial Analysis Table for ARS/LCR -
Additional Data/Service Number
If Service Type 1 (in 26-02) : Se-
lect Trunk Group Number
0 ~ 50 (Trunk Group Number 0 =
No Route)
101 ~ 104 (Networking ID)
If Service Type 2 (in 26-02) :
F-Route Time Schedule Not
Used = 0 ~ 100
(F-Route Table Number).
Refer to Programming Manual..
F-Route Time Schedule Used =
0 ~ 100
(F-Route Selection Number).
Refer to Programming Manual..
0
26-02-05 Dial Analysis Table for ARS/LCR -
Dial Treatment for ARS
0 ~ 15 0
26-03-01 ARS Dial Treatments - Treatment Code Maximum 36 characters No Setting
20-03-04 System Options for Single Line Telephones - Di-
al Sending Start Time for SLT or ARS
0 ~ 64800 seconds 1
ARS with F-Route routing
Program
No.
Program Name Input Data Default
11-09-01 Trunk Access Code - Trunk Access Code Dial (Up to four digits) 0
26-01-01 * Automatic Route Selection (ARS/F-Route) Serv-
ice - ARS Service
0 = Disabled (ARS service is
OFF.)
1 = Enabled (ARS service is
ON.)
0
26-02-01 * Dial Analysis Table for ARS/LCR -
Dial
Maximum of 16 digits (0 ~ 9,
*
,
#, @)
No Setting
26-02-02 * Dial Analysis Table for ARS/LCR -
ARS Service Type
0 = No Service (Call Restricted)
1 = Route to Trunk Group
2 = Select F-Route Access
0
26-02-03 * Dial Analysis Table for ARS/LCR -
Additional Data/Service Number
If Service Type 1 (in 26-02) : Se-
lect Trunk Group Number
0 ~ 50 (Trunk Group Number 0 =
No Route)
If Service Type 2 (in 26-02) :
F-Route Time Schedule Not
Used = 0 ~ 100
(F-Route Table Number).
Refer to Programming Manual..
F-Route Time Schedule Used =
0 ~ 100
(F-Route Selection Number).
Refer to Programming Manual..
0
44-05-01 * ARS/F-Route Table - Trunk Group Number 0 = Trunk Group 0 (Call Restric-
ted)
1 ~ 50 = Trunk Group 1 ~ 50
0
44-05-08 ARS/F-Route Table - Dial Treatment 0 = No Dial Treatment Table
Added (Call will be sent out of
the system as dialed.)
1 ~ 15 = ARS Treatment tables 1
~ 15
0
44-05-09 * ARS/F-Route Table - Maximum Digit 0 = Not Set (Call will wait for the
timer in PRG 20-03-04 before
being sent out of the system.)
1 ~ 24 = 1 ~ 24 digit length
0
SL2100 ISSUE 1.0
1-84
Automatic Route Selection (ARS/F-Route)
A

Table of Contents

Other manuals for NEC SL2100

Related product manuals