NEC UNIVERGE DT700 - 7 Basic Phone Operation; BASIC CALL OPERATION; CALL TRANSFERRING AND CONFERENCING; ADVANCED MESSAGING FEATURES

DT700 Phone User Guide 7-101
Ch 7 - Basic Phone Operation
. . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B ASIC P HONE O PERATION 7
These procedures encompass both the economy and value phones in the DT700
series lineup. The DT710 (ITL-2E) phone, however, does not have softkeys.
Note: The DT710 (ITL-6DE) phone has a smaller screen display than is shown in the
examples in this section. You may have to scroll using the cursor pad and
softkeys to see all available options.
The following symbols represent the DT700’s directional cursor pad and key pad:
Note: The softkeys are buttons that change function depending on the situation.
Each softkey’s current function is displayed on the LCD screen above the
button on the phone.
Figure 7.1 DT730G Color screen softkeys ITL-12CG)
User actions/Keys
Digit key Select corresponding menu Item
4-way scroll BACK key
c
(Redial key)
Return to User Settings menu
4-way scroll FORWARD key
a
(Directory key)
Select highlighted menu item
4-way scroll UP key
d
(Volume UP key)
Move to previous menu item
4-way scroll DOWN key
b
(Volume DOWN key)
Move to next menu item
ENTER key
b
(center button on cursor pad)
Select highlighted menu item
Softkeys