NEC UNIVERGE DT700 - Connect Phone to Headset Base Station

. . . . .
JABRA BLUETOOTH® HEADSET SUPPORT FOR DT700 PHONES
Jabra Headset
DT700 Phone User Guide D-333
Figure D.6 Select Headset options
4 Select 2 Ringing.
Figure D.7 Headset ringing options
5 Do one of the following:
• To enable ringing on the headset only, select 2 Headset..
• To enable ringing on the headset and the phoneset, select
3 Phone and Headset.
Figure D.8 Enable Headset ringing
6 Press Enter b on the cursor pad or the OK softkey to accept the setting.
You can also press the Cancel softkey to exit without making any changes.
Note: The setting defaults to 1 Phone.
Connect Phone to Headset Base Station
1 Press the tab on the port cover on the left side of the back of the phone to release the
protective cover that is over the SIDE 2 port. Remove the cover.