. . . . .
INSTALLATION
DT700 Phone User Guide 3-55
8 Tuck the excess cord into the wall mount unit.
Figure 3.25 Wall Mount Install
8LK-L MODULE INSTALLATION
WARNING! TO PREVENT POSSIBLE DAMAGE TO THE PHONE
TERMINAL DURING INSTALLATION OR REMOVAL,
DISCONNECT THE LINE CORD/LAN CABLE AND THE AC/DC
ADAPTER FROM THE PHONE TERMINAL TO POWER OFF
THE TERMINAL DURING THE INSTALLATION PROCEDURE.
To install the 8LK-L Module
1 Remove the left side panel from the phone.
2 Attach the 8LK-L module to the phone using the provided screws.
Figure 3.26 Securing the 8LK-L with Screws
3 On the back of the phone, press the tab on the port cover on the left side of the back of
the phone to release the protective cover that is over the ports. Remove the cover.
To Next Page
Loading...
