. . . . .
JABRA BLUETOOTH® HEADSET SUPPORT FOR DT700 PHONES
Jabra Headset
DT700 Phone User Guide D-339
JABRA HEADSET TROUBLESHOOTING
I cannot hear phone audio through my headset
• Make sure the headset base is powered on.
• Verify that your phone is connected to the network and working correctly.
• Check the physical connections between the headset base station and your phone.
• Ensure that all cables are firmly seated.
• Verify the headset is enabled on the phone:
a. Press the Menu key on the phone.
b. Select 3 User Settings.
c. Select 1 Headset.
d. Select 1 Enable/Disable.
e. Select 2 Enable.
f. Press Enter b on the cursor pad or the OK softkey to accept the setting.
• Contact your system administrator to verify that the Side 2 Connector is enabled on your
phone.
The headset is not working correctly
• Make sure the headset base is receiving power.
• Verify the headset is charged.
On a Call Terminate a Call Multifunction
button
Tap
Once
Mute/Unmute the
Headset
Microphone
Volume
Control
touch panel
Tap
Twice
Headset Volume Adjust
Up/Down
Idle Outgoing Call (Dial
tone)
Multifunction
button
Tap
Once
Redial Tap
Twice
DT700
Connects
Using
Jabra Headset
Base
Side 2 connector
port
EHS Adapter AUX Port
Headset port Telephone
Cable
Headset port
(graphic)
Phone
State
Function Button Action
To Next Page
Loading...
