BASIC SETTINGS/CONFIGURATION
Basic Setup with the Menus and Cursor Pad
4-78 DT700 Phone User Guide
Figure 4.48 Dial Preference options
• 1 Disable: When dialing from the Personal Directory or Call History, numbers
will be dialed as they appear in the Personal Directory or Call History. If your
system requires an outside line access code, you may not be able to dial entries
using the Call History.
•
2 Enable: When dialing Personal Directory or Call History entries, you will be
prompted to edit/confirm the number before the phone dials.
5 Press Enter b on the cursor pad or the OK softkey to accept the setting.
You can also press the Cancel softkey to exit without making any changes.
Note: For more information on the Personal Directory, see “The Personal Directory”
on page 11-270. For more information on Speed Dials, see “Speed Dial and
Programmable Keys” on page 8-124
CLEAR USER SETTINGS
The following menus are used to delete information from the Flash memory.
Selecting “Clear User Settings” restores all user settings to their default value.
Selecting “Clear Personal Directory” erases all Personal Directory entries and Speed
Dial Key information on the phone.
Selecting “Clear Call History” erases all of the Call History information on the phone.
It does not delete your system call history information or the call history information
for any phone applications.
To Clear User Settings
1 Press the Menu key\User Settings.
2 Select 6 Clear Settings or 7 Clear Settings.
Note:
The number of the menu item may differ based on the Edit Before Dialing
settings on your phone.
3 Select 1 Clear User Settings.
To Next Page
Loading...
