NEC UNIVERGE DT700 - Basic Setup with the Cursor Pad or Up;Down Keys; To Adjust the Ringing Volume; To Adjust the Soft Ring Volume (Sip@Net Platforms)

BASIC SETTINGS/CONFIGURATION
Basic Setup with the Cursor Pad or Up/Down Keys
4-62 DT700 Phone User Guide
BASIC SETUP WITH THE CURSOR PAD OR
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
UP/DOWN KEYS
For the DT710 (ITL-2E) phone, you can use the up/down keys on your phone to
adjust the volume settings.
Figure 4.3 DT710 (ITL-2E) Up/Down Keys
For all other phones, use the up/down keys on the cursor pad.
Figure 4.4 DT710 (ITL-6DE) and DT730 (ITL-12D, ITL-24D and ITL-32D)
Cursor Pad Up/Down Keys
To adjust the ringing volume
• Press the d Up/b Down key on the Cursor pad while on-hook.
You must press the d Up/b Down key multiple times and cannot press and hold to
adjust the volume.
Figure 4.5 Adjust Handset ringing volume
To adjust the Soft Ring volume (SIP@Net Platforms)
• Press the d Up/b Down key on the Cursor pad while Soft Ring is active.
You must press the
d Up/b Down key multiple times and cannot press and hold to
adjust the volume.