NEC UNIVERGE DT700 - Basic Settings;Configuration

DT700 Phone User Guide 4-61
Ch 4 - Basic Settings/Configuration
. . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B ASIC S ETTINGS /C ONFIGURATION 4
This chapter describes how to customize your phone.
Note: The DT710 (ITL-6DE) phone has a smaller screen display than is shown in the
examples in this section. You may have to scroll using the cursor pad and
softkeys to see all available options.
The following symbols represent the DT700’s directional cursor pad and key pad:
DT710 (ITL-6DE) ECONOMY PHONE DISPLAY
The DT710 (ITL-6DE) LCD area shows three lines of information, while the DT730
and DT730G phones are capable of showing five lines of information. Most screen
examples in this guide are for DT730 phones.
Figure 4.1 Main Menu Display for ITL-6DE
The  Up and  Down softkeys on the phone indicate to the user when there are
more options than displayed on the LCD screen.
Figure 4.2  Up and  Down softkeys on Change or Select Monitor
Menu Display for DT710 ITL-6DE Phones
User actions/Keys
Digit key Select corresponding menu Item
4-way scroll BACK key
c
(Redial key)
Return to User Settings menu
4-way scroll FORWARD key
a
(Directory key)
Select highlighted menu item
4-way scroll UP key
d
(Volume UP key)
Move to previous menu item
4-way scroll DOWN key
b
(Volume DOWN key)
Move to next menu item
ENTER key
b
(center button on cursor pad)
Select highlighted menu item