NEC UNIVERGE DT700 - Key Module

. . . . .
INTRODUCTION TO THE DT700 AND DT730G PHONES
Optional Equipment
DT700 Phone User Guide 2-37
Figure 2.27 ITL-24D Phone with Key Kit
The Key Kit refers to the numeric keypad and other hard keys.
The Internal Key Module refers to the internally connected module that contains the
line key and programmable keys. The Internal Key Type displays the number of
Programmable Keys the Internal Key Module is equipped to use. Additional
programmable keys may be added by upgrading the Internal Key Module. The
Internal Key screens are also used to configure the number of programmable keys
when the Internal Key Module is upgraded.
The following table describes different phone models, their supported Key Kit types
and Internal Key Module configurations.
Table 2.17 Supported Key Kit types
Model Name Commercial Name Key Kit Type
Supported Internal Key Modules
Factory Installed Upgrade Part Options
DT710 ITL-2E IP Economy Kit 10 • Line 2 • N/A
DT710 ITL-6DE IP Economy Kit 2 • Line 6 • N/A
DT730 ITL-8LD IP Value Kit 2 • Line 8 • N/A
DT730 ITL-12D IP Value Kit 2 • Line 12 • Line 24
DT730 ITL-24D IP Value Kit 2 • Line 24 • N/A
DT730 ITL-32D IP Value Kit 2 • Line 24 • N/A
DT730G ITL-12CG IP Value Kit 2 • Line 12 • Line 24
DT730G ITL-24CG IP Value Kit 2 • Line 24 • N/A
8LK-L
Programmable
Key Module
Internal Key
Module
(Programmable
Keys)
Key Kit
(Keypad)