PROGRAMMABLE KEYS
Speed Dial and Programmable Keys
8-126 DT700 Phone User Guide
OPTIONAL PROGRAMMABLE KEY MODULE
Additional Programmable Keys may also be added by installing the optional
Programmable Key Module. ITL-32D phones come with the 8LK-L already attached.
The following table lists the Programmable Key Modules that are supported by the
DT700 series of phones:
8LK-L Key Numbering
Key numbering for the 8LK-L module always uses key numbers 25 through 32, no
matter how many keys are on the original phone. If the 8LK-L module is installed on a
ITL-12D phone, there is a gap in the numbering of the Speed Dial keys (key numbers
2 to 12 on the phone, key numbers 25 to 32 on the 8LK-L module).
DCL-60 CONSOLE (TYPE A)
Feature Support by Model
The DT730 phones support the DCL-60 Console (Type A) connected to the UART
Side 2 Connector port to add an additional 60 line keys on the phone.
Each of these keys can be programmed as a Speed Dial key, programmable Key or
Enhanced Programmable Key (Record, Park, Hot Desk key, etc).
Speed Dial keys can be configure on the DCL-60 Console to allow the phone to
monitor the status or presence of other users.
Note: Only one connection to the Side 2 connector port is available on the phone, so
the phone can only support a DCL-60 console OR a Jabra headset. Both
cannot be connected to the same phone at the same time.
MAXIMUM NUMBER OF LINE KEYS WITH THE DCL-60
The following tables describe the maximum number of line keys supported on each
DT700 model when DCL-60 configuration modes is enabled. It also specifies the
Product Name Model
Programmable Key
Module Support?
Module
DT710 ITL-2E No N/A
ITL-6DE No N/A
DT730 ITL-8LD No N/A
ITL-12D Yes 8LK-L
ITL-24D Yes 8LK-L
ITL-32D Factory Installed 8LK-L
DT730G ITL-12CG Yes 8LK-L
ITL-24CG Yes 8LK-L
ITL-12DG Yes 8LK-L
ITL-24DG Yes 8LK-L