BASIC PHONE OPERATION
Call Waiting/Concurrent Calls
7-110 DT700 Phone User Guide
2 Do one of the following:
• To review the caller information before answering the call: Press the Line
Key, and then press the Answer key to take the call, or press the Reject softkey
to reject the call.
• To answer the call without reviewing the caller information: Press the
Answer key.
Figure 7.25 Answer key
The current call is put on hold, and the new call is answered.
3 When you have completed the call, press the EndCall softkey to end the call and return
to your original call.
4 Press the Hold key or the Resume softkey to resume the original call.
Figure 7.26 Hold key
To place a second call (Concurrent call)
If it is enabled by your system administrator, you can place a new call while you are
on another call. They will be treated as two separate phone calls, and you cannot
conference the calls or transfer one call to the other call.
For information on conferencing two calls, see “Conferencing Calls” on page 7-111.
1 Press the Hold key to place the current call on hold, then press the NewCall softkey to
get dial tone.
Figure 7.27 Hold key
Figure 7.28
Call on Hold and NewCall softkey
2 Enter the phone number you want to call.
or
DT710 (ITL-6DE) and DST730 (ITL-8LD,
ITL-12D, ITL-24D, and ITL-32D) phones
DT710 (ITL-2E) phones
To Next Page
Loading...
