. . . . .
BASIC SETTINGS/CONFIGURATION
Basic Setup with the Menus and Cursor Pad
DT700 Phone User Guide 4-75
5 Use the + and - softkeys to adjust the LCD contrast.
Figure 4.41 Adjust LCD Contrast settings
6 Press Enter b on the cursor pad or the OK softkey to accept the setting.
You can also press the Cancel softkey to exit without making any changes.
To change the LCD Backlight Timeout
You can adjust the timeout of the LCD backlight on your phone. You can specify a
value between 0 (None) to 255 seconds.
1 Press the Menu key.
2 Select 3 User Settings.
3 Select 5 LCD Settings.
Figure 4.42 LCD settings
4 Select 2 LCD Backlight Timeout.
Figure 4.43 LCD Backlight Timeout settings
5 The default backlight timeout, in seconds, for your system is shown. To change the
timeout, press the Delete softkey and use the telephone keypad to enter new backlight
timeout.
To Next Page
Loading...
