. . . . .
DT700 MICROBROWSER AND ENHANCED PROGRAMMABLE KEYS
Using Enhanced Programmable Keys
DT700 Phone User Guide 9-207
To stop the recording a call
• Press the Record key.
The call recording will stop.
CALL RECORDING INDICATION
If call recording indication is enabled for your account, the DT700 phone indicates call
recording status.
If call recording indication is enabled, a call recording icon
is shown in the call
control home screen, and through the LED on the Record key for DT730 ITL-8LD
Desi-less phones.
Table 9.3 Call recording indications
When multiple calls are being recorded, the DT700 keeps track of all the calls that are
being recorded and updates the state of the Record key LED and the call recording
icon based on the call state.
SEND TO VM KEY
Send to Voice Mail
• While your phone is ringing, press the Send to VM key.
The call will be sent directly to your voice mail box and the phone will stop ringing.
Event
Record Key
LED
Icon (Call
Control and
Desi-less
Secondary
Screen)
Description
On Demand recording Steady Red Indicates that the call is being
recorded by On Demand Recording.
On Demand recording
- On Hold (local or
remote hold)
Off None When the recording is stopped, the
indication is also stopped.
When the call is resumed, call
recording indication is displayed
again.
Auto Recording Steady Red Indicates that the call is being
recorded by Auto Recording.
No recording
Call terminated/
recording terminated
Off None Indicates that no call is being
recorded.
If the call you were recording is
ended, the call recording
automatically stops.
Call recording
indication is not
enabled
Off None No call recording indication is shown
on the phone, even when there is a
call recording.
To Next Page
Loading...
