. . . . .
PROGRAMMABLE KEYS
Speed Dial and Programmable Keys
DT700 Phone User Guide 8-135
Using a headset
• Press the desired Speed Dial Key.
Or
• Press the Feature Key, then press the Speed Dial Key to view the Speed Dial details, then
press the Dial softkey.
Note:
Speed Dials are dialed as they are programmed into the phone. If you get a
fast busy signal when you attempt to dial using a Speed Dial Key, you may
need to program an outside line access code into the Speed Dial number.
To edit the number before dialing
1 Press the Feature Key, and then press the desired Speed Dial Key.
2 Press the Dial softkey.
Figure 8.29 Dial softkey
3 Use the Cursor Pad and phone keypad to edit the number as needed, then press the OK
softkey.
Figure 8.30 Edit the Number
Note: Any changes made to the number are only used for dialing one time. They are
not saved in the selected Speed Dial Key configuration.
Note: To change the options about being prompted to confirm the number before
your phone dials external numbers, see “To edit the Dial Preference” on
page 4-77.
SPEED DIAL KEY PROGRAMMING EXAMPLES
Speed Dial Keys can be programmed in two ways:
• Using the Feature Key
• Added from the Personal Directory
When you program a Speed Dial Key using the Feature Key, you can select to also
add the entry to the Personal Directory or to not add the entry to the Personal
To Next Page
Loading...
