NEC UNIVERGE DT700 - To Change the Display Language

. . . . .
BASIC SETTINGS/CONFIGURATION
Basic Setup with the Menus and Cursor Pad
DT700 Phone User Guide 4-71
Figure 4.29 Select Headset options
4 Select 3 Tone Volumes.
Figure 4.30 Tone Volumes options
5 Select 2 Hold Reminder Volume.
Figure 4.31 Hold Reminder volume
6 To change the volume level, press the Delete softkey and use the telephone keypad to
enter new volume level.
Figure 4.32 Adjust Hold Reminder Volume
7 Press Enter b on the cursor pad or the OK softkey to accept the setting.
You can also press the Cancel softkey to exit without making any changes.
Note: The setting defaults to 19 (maximum tone volume).
To change the Display Language
1 Press the Menu key.