NEC UNIVERGE DT700 - To Clear Handset Forwarding Using Star Codes

DT700 MICROBROWSER AND ENHANCED PROGRAMMABLE KEYS
Using the Microbrowser
9-186 DT700 Phone User Guide
1 Press the Feature Key.
2 Press the Home soft key or wait 2 seconds to connect to the microbrowser home page.
3 Select Handset Forwarding.
4 Select Clear forwarding.
Figure 9.17 Clear forwarding
This page handles the following events:
5 The phone clears all of the handset forwarding settings that are applied to the phone.
Note:
This only clears the handset forwarding settings applied to the phone.
Administrator configured or system-level forwarding settings are not deleted.
To clear Handset forwarding using star codes
1 Lift the handset from the phone.
2 Dial *73.
All handset forwarding settings that are applied to the phone are cleared.
Soft Key Features: Explanation

Move to previous menu item (does not show if first menu item is
selected).

Move to next menu item (does not show if last menu item is
selected).
Exit Exit the microbrowser to the appropriate call status screen.
Select Select highlighted menu item.
Hard Key Features: Explanation
4-way scroll BACK key
(Redial key)
Return to the previous screen.
4-way scroll FORWARD key
(Directory key)
No operation.
4-way scroll UP key
(Volume UP Key)
Remain on existing screen move cursor up.
4-way scroll DOWN key
(Volume DOWN Key)
Remain on existing screen move cursor down.
ENTER key Exit the microbrowser to the appropriate call status screen