NEC UNIVERGE DT700 - Monitor;Supervise Key; To Monitor a Call (Workgroup Scenario)

DT700 MICROBROWSER AND ENHANCED PROGRAMMABLE KEYS
Using Enhanced Programmable Keys
9-206 DT700 Phone User Guide
Figure 9.40 CB Reset soft key
MONITOR/SUPERVISE KEY
To Monitor a Call (Workgroup scenario)
If you have Supervise rights over other users, you can listen (monitor) or join (barge)
calls for users you have Supervise rights over.
The workgroup member’s LED on your phone will display stead red to show they are
currently on a call.
1 Press the key for the workgroup member.
2 Press the Monitor soft key.
Figure 9.41 Monitor soft key
You can then press the Barge or Record soft key to barge on the call or start a
recording of the call. Press Exit to exit this screen without starting a Barge session or
recording of the call.
Figure 9.42 Monitoring status
RECORD KEY
To record your current call
• Press the Record key.
A recording of your current call starts.