BASIC SETTINGS/CONFIGURATION
Basic Setup with the Menus and Cursor Pad
4-68 DT700 Phone User Guide
Figure 4.20 Headset Options
6 Select 2 Enable.
Figure 4.21 Enable Headset
7 Press Enter b on the cursor pad or the OK softkey to accept the setting.
You can also press the Cancel softkey to exit without making any changes.
To set external headset ringing (Optional)
You can set your phone to ring only through your external headset. The phone will not
ring from the telephone speaker when you have it set to ring to the headset.
Note: Hold reminder tone, soft ring, ringer volume, and preview of the User
Adjustable Ringtones on selection may not be supported by the headset.
They are only played on the DT700 speaker when Headset Ringing is set to
Phone or Phone and Headset.
1 Press the Menu key.
2 Select 3 User Settings.
3 Select 2 Headset.
Figure 4.22 Select Headset options
4 Select 2 Ringing.
To Next Page
Loading...
