DT700 MICROBROWSER AND ENHANCED PROGRAMMABLE KEYS
Using the Microbrowser
9-180 DT700 Phone User Guide
HOT DESKING STATUS UPDATES
Note: Depending on the speed of your system and the processes that are running
and updating on your system, it may take up to 5 minutes before your name
and number are displayed on the phone after you log in to the phone. The
phone’s main display will automatically refresh when it receives the name and
number information.
You will be able to make and receive calls immediately after a successful login,
even if the phone does not display your name and number yet.
You can log out using a star code, you can log in at another phone on the system, or
the system may automatically log you out after a configured period of time.
HANDSET FORWARDING
Note: Conditional handset forwarding requirements set from the phoneset apply to
address-based users only. *72/*73 Handset Forwarding and Handset
Forwarding options from the phoneset are not supported for User Centric
enabled users. User Centric enabled users must use supported 3C system
client applications to set forwarding conditions.
The Handset Call Forwarding pages allow you to set, change and delete handset call
forwarding conditions for your phoneset, rather than using only 3C System Star
Codes or requiring 3C system client applications to access advanced call forwarding
settings.
HANDSET CALL FORWARDING SETTINGS ON THE 3C
SYSTEM
Note: Handset Forwarding settings for the 3C system are not mutually exclusive and
can be added cumulatively.
You can select a forwarding setting and enter any phone number (internal or external)
for the condition, and then activate the new setting. Handset forwarding can be set
either using the phone’s microbrowser application or using 3C System Star Codes.
Handset Forwarding conditions are persistent until cleared by the user (using the
phoneset, star codes or changed by supported 3C system client applications) or a
system administrator (using the 3C administrator).
Forwarding conditions that are set using the handset are denoted in the phone and
3C Administrator application by a destination description of “entered at handset”. The
handset forwarding conditions are shown in every forwarding profile for the user.
Changing or deleting a handset forwarding condition in one forwarding profile will also
update the view in all other profiles.
If the primary address of the phone has any other forwarding conditions, the handset
forwarding conditions are pre-pended to all profiles. All forwarding conditions are
evaluated by the MGC when processing a call regardless of where they are invoked.
SERVICE CONDITIONS
• Multiple Handset Forwarding Conditions must be enabled for the user in the
System Initialization settings for users to set multiple Handset Forwarding
conditions.
To Next Page
Loading...
