. . . . .
INTRODUCTION TO THE DT700 AND DT730G PHONES
DT700 and DT730G Series Phones
DT700 Phone User Guide 2-9
5. Help key Press the Help key and then press a softkey to display
information about that softkey.
6. Programmable Keys The first programmable key is reserved as the Line Key. Line
Keys allow the user to select which line to operate on.
Any programmable keys not used as Line Keys can be
programmed as Speed Dial Keys by the user or system
administrator. Numbers up to 24 digits can be assigned to
Speed Dial Keys. The numbers may be a telephone number or
star/hash codes.
7. Feature key This key displays a set of menu options that provide additional
capabilities, such as speed dial key programming and
microbrowser applications.
8. Recall key
3C systems:
Press this key to get a dial tone. If you are currently on a call,
the current call will be placed on hold and a new call will be
started.
SIP@Net Platforms:
See the Hold key.
9. Answer key Press this key to answer an incoming call. If you have a
headset attached to the phone, the audio will go through the
headset. If you do not have a headset attached to the phone,
the audio will go through the speaker on the phone.
You can also press this key to answer a waiting call.
10. Mic key Press key to mute the microphone. The LED on this key
flashes when the microphone is muted. Press the key again to
un-mute the microphone.
11. Menu key Press this key to access the features and settings provided on
the local telephone menu, such as Call History, Personal
Directory or User Settings.
12. Hold key Press this key to place a call on hold.
13. Transfer key Press this key to transfer a call.
14. Speaker key Controls the built-in speaker which can be used for Hands
Free dialing and conversations.
The LED on this key lights when the speaker is active.
15. Cursor pad Use this key to navigate to various features.
The up and down keys on the cursor pad can be used to adjust
the volume of the phone.
16. USB Charging Port This port, located behind the Color LCD screen, can be used
to charge USB devices.
To Next Page
Loading...
