Wireless Configuration and Security
106
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
2. Verify that your wireless clients have a link to the wireless VPN firewall. If you have enabled
the DHCP server on the wireless VPN firewall (see Configure a VLAN Profile on p
age 51
(for IPv4) and Configure IPv6 LAN Settings on
page 64), verify that your wireless clients
are able to obtain an IP address through DHCP from the wireless VPN firewall.
3. V
erify network connectivity by using a browser such as Internet Explorer 6.0 or later or
Mozilla Firefox 1.5 or later to browse the Internet, or check for file and printer access on your
network.
If you have trouble connecting to the wireless VPN f
irewall, try to connect without security by
selecting OPEN from the Security drop-down list on the Edit Profiles screen for the profile
that is allocated to the access point. If that does not help you to solve the connection
problem, see Chapter 11, Troubleshooting.
To Next Page
Loading...
