NETGEAR FVS318N

LAN Configuration
63
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Change Group Names in the Network Database
By default, the groups are named Group1 through Group8. You can change these group
names to be more descriptive, such as GlobalMarketing and GlobalSales. However, note that
on the Content Filtering screen (see Configure Content Filtering on page 142), the default
group names are displayed and not the names that you specified.
 To edit the names of any of the eight available groups:
1. Select Network Con
figuration > LAN Setting > LAN Groups (IPv4). The LAN Groups
(IPv4) screen displays (see Figure 31 on p
age 60, which shows some examples in the
Known PCs and Devices table).
2. Click the Edi
t Group Names option arrow to the right of the LAN submenu tabs. The
Network Database Group Names screen displays. (The following figure shows some
examples.)
Figure 33.
3. Select the radio button next to the group name that you want to edit.
4. T
ype a new name in the field. The maximum number of characters is 15; spaces and double
quotes (") are not allowed.
5. Repe
at step 3 and step 4 for any other group names.
6. Click App
ly to save your settings.