NETGEAR FVS318N

Virtual Private Networking Using IPv4 IPSec and L2TP Connections
214
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 126.
3. From the client PC, ping a computer on the wireless VPN firewall LAN.
Modify or Delete a Mode Config Record
Note: Before you modify or delete a Mode Config record, make sure it is
not used in an IKE policy.
 To edit a Mode Config record:
1. On
the Mode Config screen (see Figure 115 on page 199), click the Edit button in the
Action column for the record that you want to modify. The Edit Mode Config Record
screen displays. This screen is ide
ntical to the Add Mode Config Record screen (see
Figure 116 on p
age 200).
2. Modif
y the settings as explained in Table 49 on page 201.
3. Click Apply to save
your settings.
 To delete one or more Mode Config records:
1. On
the Mode Config screen (see Figure 115 on page 199), select the check box to the
left of each record that you want to delete, or click the Sel
ect All table button to select
all records.
2. Click the Delete t
able button.