Wireless Configuration and Security
86
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
• The time it takes to establish a wireless connection can vary depending on both your
security settings and placement. WEP connections can take slightly longer to establish.
Also, WEP encryption can consume more battery power on a notebook computer.
Configure the Basic Radio Settings
The radio settings apply to all virtual access points on the wireless VPN firewall. The default
wireless mode is 802.11ng. You can change the wireless mode, country, and many other
radio settings on the Radio Settings screen (described in this section) and on the Advanced
Wireless screen (see Configure Advanced Radio Settings on p
age 104). The default radio
settings should work well for most configurations.
Note: To configure radio settings, you first need to disable the access
points.
To configure the basic radio settings:
1. Select Netwo
rk Configuration > Wireless Settings > Radio Settings. The Radio
Settings screen displays:
Figure 44.
To Next Page
Loading...
