331
A
A. Default Settings and Technical
Specifications
This appendix provides the default settings and the physical and technical specifications of the
wireless VPN firewall in the following sections:
• Default Settings
• Physical and Technical Specifications
Default Settings
You can use the factory default Reset button located on the rear panel to reset all settings to
their factory defaults. This is called a hard reset (for more information, see Revert to Factory
Default Settings on page 286):
• T
o perform a hard reset, press and hold the factory default Reset button for
approximately 8 seconds (until the Test LED blinks rapidly). The wireless VPN firewall
returns to the factory configuration settings that are shown in the following table.
• Pressing t
he factory default Reset button for a shorter period of time simply causes the
wireless VPN firewall to reboot.
The following table shows the default configuration settings for the wireless VPN firewall:
Table 81. Wireless VPN firewall factory default configuration settings
Feature Default behavior
Router login
User login URL https://192.168.1.1
Administrator user name (case-sensitive) admin
Administrator login password (case-sensitive) password
Guest user name (case-sensitive) guest
Guest login password (case-sensitive) password
To Next Page
Loading...
