NETGEAR FVS318N

Monitor System Access and Performance
311
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
View the WAN Port Status
You can view the status of the IPv4 and IPv6 WAN connections, the DNS servers, and the
DHCP servers.
IPv4 WAN Port Status
 To view the IPv4 status of the WAN port:
1. Select Network Configuratio
n > WAN Settings > Broadband ISP Settings (IPv4).
The Broadband ISP Settings (IPv4) screen displays (see Figure 9 on p
age 25).
2. Click the Broadb
and Status option arrow in the upper right of the screen to display the
Connection Status pop-up screen. (The following figure shows a static IP address
configuration.)
Figure 181.
The type of connection determines the information that is displayed on the Connection
Status screen. The screen can display the information that is described in the following
table:
Open Ports The incoming ports that are associated with this rule. Incoming traffic using one of
these ports is sent to the IP address that is listed in the LAN IP Address field.
Time Remaining The time remaining before this rule is released and made available for other
computers or
devices. This timer is restarted when incoming or outgoing traffic is
received.
Table 79. Connection Status screen information for an IPv4 connection
Item Description
Connection Time The period that the wireless VPN firewall has be
en connected through the WAN port.
Connection Type The connection type can be either DHCP or Static IP.
Table 78. Port Triggering Status screen information (continued)
Item Description