NETGEAR FVS318N

Manage Users, Authentication, and VPN Certificates
252
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Create Groups
 To create a VPN group:
1. Select Users > Group
s. The Groups screen displays. (The following figure shows the
wireless VPN firewall’s default group—geardomain—and, as an example, several other
groups in the List of Groups table.)
The List of Groups table displays the VPN groups with the following fields:
• Check
box. Allows you to select the group in the table.
• Name. The n
ame of the group. If the group name is appended by an asterisk, the
group was created by default when you created the domain with the identical name as
the default group. You cannot delete a default group; you can delete only the domain
with the identical name, which causes the default group to be deleted.
• Domain. The
name of the domain to which the group is assigned.
• Action. The Edit t
able button, which provides access to the Edit Group screen.
Figure 147.
2. Under the List of Groups table, click the Add table button. The Add Group screen displays: