NETGEAR FVS318N

Monitor System Access and Performance
313
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
The type of connection determines the information that is displayed on the Connection
Status screen. The screen can display the information that is described in the following
table:
Depending on the type of connections, any of the fo
llowing buttons might display on the
Connection Status screen:
• Renew. Click to
renew the DHCP lease.
• Release. Click to
disconnect the DHCP connection.
• Disconne
ct. Click to disconnect the static IP connection.
View the Attached Devices and the DHCP Log
The LAN Groups screen shows the network database, which is the Known PCs and Devices
table, which contains all IP devices that wireless VPN firewall has discovered on the local
network. The LAN Setup screen lets you access the DHCP log.
Table 80. Connection Status screen information for an IPv6 connection
Item Description
Connection Time The period that the wireless VPN firewall has been connected through the WAN
port.
IPv6 Connection Type The connection type can be either Dynamic IP (DHCP) or Static.
IPv6 Connection Status The connection status can be eith
er Connected or Disconnected.
IP Address The IPv6 addresses that were automaticall
y detected or that you configured on
the Broadband ISP Settings (IPv6) screen.
Note: The Gateway and DNS Server (IPv6) fields apply only to a static IPv6
conn
ection.
Note: For more information, see Let the Wireless VPN Firewall Automatically
Configure an IPv6 Internet Connection o
n page 33 and Manually Configure an
IPv6 Internet Connection on
page 34.
Gateway
DNS Server (IPv6)