NETGEAR FVS318N

Monitor System Access and Performance
300
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
View Status Screens
The wireless VPN firewall provides real-time information in a variety of status screens that
are described in the following sections:
• View the System Status
• View the VPN Connection Status and L2TP Users
• View the VPN Logs
• View the Port Triggering Status
• View the WAN Port Status
• View the Attached Devices and the DHCP Log
View the System Status
When you start up the wireless VPN firewall, the default screen that displays is the Router
Status screen.
The Router Status screen and Detailed Status screen provide real-time information about the
following
important components of the wireless VPN firewall:
• Firmware version
• Both
IPv4 and IPv6 WAN and LAN port information
• Wireless information
• In
terface statistics
• VLAN st
atus, including port memberships
These status screens are described in the following sections:
• Router Status Screen
• Router Statistics Screen
• Detailed Status Screen
Router Status Screen
 To view the Router Status screen:
Select Monitoring > Route
r Status. The Router Status screen displays: