NETGEAR FVS318N

Network and System Management
284
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
2. Enter the settings as explained in the following table:
3. Click Apply to
save your changes.
Manage the Configuration File
The configuration settings of the wireless VPN firewall are stored in a configuration file on the
wireless VPN firewall. This file can be saved (backed up) to a PC, retrieved (restored) from
the PC, cleared to factory default settings, or upgraded to a new version.
Once the wireless VPN firewall is installed
and works correctly, make a backup of the
configuration file to a computer. If necessary, you can later restore the wireless VPN firewall
settings from this file.
The Backup & Restore Settings screen lets you:
• Back up
and save a copy of the current settings (see Back Up Settings on page 285)
• Restore save
d settings from the backed-up file (see Restore Settings on page 286)
• Revert to the factory
default settings (see Revert to Factory Default Settings on page 286)
• Upda
te the firmware (see Update the Firmware on page 287)
To display the Settings Backup and Firmware Upgrade screen, select Adm
inistration >
Settings Backup & Upgrade.
Table 71. SNMP SysConfiguration screen settings
Setting Description
SysContact Enter the SNMP system contact information that is available to the SNM
P manager.
This setting is optional.
SysLocation Enter the physical location of the wireless VPN firewall. This setting is optional.
SysName Enter the name of the wireless VPN
firewall for SNMP identification purposes. The
default name is FVS318N.