NETGEAR FVS318N

Virtual Private Networking Using IPv4 SSL Connections
227
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
 To edit a portal layout:
1. On the Portal Layouts screen (see Figure 132 on page 224), click the Edit button in the
Action column for the portal layout that you want to modify
. The Edit Portal Layout
screen displays. This screen is identical to the Add Portal Layout screen (see the
previous figure).
2. Mo
dify the settings as explained in the previous table.
3. Click App
ly to save your settings.
 To delete one or more portal layouts:
1. On t
he Portal Layouts screen (see Figure 132 on page 224), select the check box to the
left of each portal layout that you want to delete, or click the Select All t
able button to
select all layouts. (You cannot delete the SSL-VPN default portal layout.)
2. Click the Del
ete table button.
Configure Domains, Groups, and Users
Remote users connecting to the wireless VPN firewall through an SSL VPN portal need to be
authenticated before they are granted access to the network. The login screen that is
presented to the user requires three items: a user name, a password, and a domain
selection. The domain determines both the authentication method and the portal layout that
are used.
You need to create name and password accounts for the SSL VPN users. When you create a
u
ser account, you need to specify a group. Groups are used to simplify the application of
access policies. When you create a group, you need to specify a domain. Therefore, you
should create any domains first, then groups, and then user accounts.
For information about how to configure domains, groups, and users, see Configure
Authentication Domains, Groups, and Users on p
age 247.
Configure Applications for Port Forwarding
Port forwarding provides access to specific defined network services. To define these
services, you need to specify the internal server addresses and port numbers for TCP
applications that are intercepted by the port-forwarding client on the user’s PC. This client
reroutes the traffic to the wireless VPN firewall.
Add Servers and Port Numbers
To configure port forwarding, you need to define the IP addresses of the internal servers and
the port number for TCP applications that are available to remote users.