NETGEAR FVS318N

Monitor System Access and Performance
307
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
View the VPN Connection Status and L2TP Users
The Connection Status screens displays a list of IPSec VPN connections, SSL VPN
connections, and L2TP users who are currently logged in to the wireless VPN firewall.
 To view the active IPSec VPN connections:
Select VPN > Conn
ection Status > IPSec VPN Connection Status. The IPSec VPN
Connection Status screen displays:
Figure 174.
The policy name, the endpoint’s IP address, the amount of data and number of packets
transmitted, and the state of the connection are listed in the table.
Wireless Configuration
Wireless Status The wireless status can be Enabled or Disabled, depending on whether or not the
default virtual access point is enabled. For information about enabling the default
virtual access point, see Configure Virtual Access Points o
n page 98.
SSID The SSID of the default profile. For information about how to configure the SSID, see
Configure and Enable Wireless Security Profiles on
page 93.
Mode The wireless mode of the radio. For information about how to configure the wireless
mode, see Configure the Basic Radio Settings on page 86.
Security Settings The security settings of the default profile. For in
formation about how to configure the
security profile, see Configure and Enable Wireless Security Profiles on page 93.
Region The region that is assigned to the radi
o. For information about how to configure the
region, see Configure the Basic Radio Settings on page 86.
Channel The active channel on the radio. For information about how to configure the channel,
see Configure the Basic Radio Settings on
page 86.
AP MAC Address The MAC address of the radio or default virtual access point. If the default virtual
access point is disabled, the MAC address is not displayed.
Table 77. Detailed Status screen information (continued)
Item Description