Internet and Broadband Settings
32
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Configure the IPv4 Routing Mode
To configure the IPv4 routing mode:
1. Select Netwo
rk Configuration > WAN Settings. The WAN Mode screen displays.
Figure 14.
2. Select the NAT radio button or the Classical Routing radio button.
Changing the WAN mode causes all LAN WAN and DMZ WAN
inbound rules to revert to default settings.
3. Click Apply to save your settings.
Configure the IPv6 Internet Connection
To set up your wireless VPN firewall for secure IPv6 Internet connections, you need to
configure the WAN port with a global unicast address. This is a public and routable IPv6 WAN
address that can be statically or dynamically assigned. The web management interface offers
two connection configuration options:
• Auto
matic configuration of the network connection.
• Manual co
nfiguration of the network connection
Each option is detailed in a section that follows.
To Next Page
Loading...
