NETGEAR FVS318N - Configure Advanced WAN Options and Other Tasks

Internet and Broadband Settings
43
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Configure Advanced WAN Options and Other Tasks
The advanced options include configuring the maximum transmission unit (MTU) size, port
speed, wireless VPN firewall’s MAC address, and setting a rate limit on the traffic that is
being forwarded by the wireless VPN firewall.
Note: Although you can access the Broadband Advanced Options screen
only through the Broadband ISP Settings (IPv4) screen, the
advanced options apply to both IPv4 and IPv6 WAN connections.
 To configure advanced WAN options:
1. Select Network Configuratio
n > WAN Settings > Broadband ISP Settings (IPv4).
The Broadband ISP Settings (IPv4) screen displays (see Figure 9 on p
age 25).
2. Click the Ad
vanced option arrow in the upper right of the screen. The Broadband Advanced
Options screen displays:
Figure 25.
3. Enter the settings as explained in the following table: