NETGEAR FVS318N

Manage Users, Authentication, and VPN Certificates
261
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Change Passwords and Other User Settings
For any user, you can change the password, user type, and idle time-out settings. Only
administrators have read/write access. All other users have read-only access.
Note: The default administrator and default guest passwords for the web
management interface are both password. NETGEAR
recommends that you change the password for the administrator
account to a more secure password, and that you configure a
separate secure password for the guest account.
Note: The ideal password should contain no dictionary words from any
language, and should be a mixture of letters (both uppercase and
lowercase), numbers, and symbols. Your password can be up to
30 characters.
Note: After a factory defaults reset, the password and time-out value are
changed back to password and 5 minutes, respectively.
 To modify user settings, including passwords:
1. Select Us
ers > Users. The Users screen displays (see Figure 149 on page 255).
2. In the Actio
n column of the List of Users table, click the Edit table button for the user for
which you want to modify the settings. The Edit Users screen displays:
Figure 154.