NETGEAR FVS318N

Internet and Broadband Settings
40
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
 To edit an ISATAP tunnel:
1. On the ISATAP Tunnels screen, click the Edit button in the Action column for the tunnel
that you want to modify. The Edit ISATAP Tunnel screen displays. This screen is
identical to the Add ISATAP Tunnel screen.
2. Modif
y the settings as explained in the previous table.
3. Click Apply to save
your settings.
 To delete one or more tunnels:
1. On
the ISATAP Tunnels screen, select the check box to the left of each tunnel that you
want to delete, or click the Select All table button to select all tunnels.
2. Click the Delete t
able button.
View the Tunnel Status
The IPv6 Tunnel Status screens displays the status of all active 6to4 and ISATAP tunnels.
 To view the tunnel status:
Select Network Configuration > IPv6 > IPv6 Tunnel Status. The IPv6 Tunnel Status screen
displays:
Figure 22.
The IPv6 Tunnel Status table shows the following fields:
• T
unnel Name. The tunnel name for the 6to4 tunnel is always sit0-WAN1 (SIT stands for
simple Internet transition); the tunnel name for an ISATAP tunnel is isatapx-LAN, in which
x is an integer.
• IPv6
Address. The IPv6 address of the local tunnel endpoint.
Configure Dynamic DNS
Dynamic DNS (DDNS) is an Internet service that allows devices with varying public IP
addresses to be located using Internet domain names. To use DDNS, you need to set up an
account with a DDNS provider such as DynDNS.org, TZO.com, Oray.net, or 3322.org. (Links
to DynDNS, TZO, Oray, and 3322 are provided for your convenience as option arrows on the